Red Tail Boas

Red tail boas are another interesting reptile i have always liked. They are one of the larger snakes, and females can reach lengths of about 9 ft. They can be found at some pet stores, but you will have to go to a breeder for a nice morph. I do not recommend this snake for a beginner. The snake will grow very rapidly after the first year. Make sure that research is done before buying a red tail boa.

Feeding:
For the most part the red tail boa is good natured, but i have seen some that have anger issues. The main thing you want to watch out for is an accidental bite. Some get very eager when feeding time comes. The boa learns that when you open the enclosure it is most likely going to get some food. They are kind of stupid, so make sure not to dangle your hand in front of a hungry boa. In the wild this snake is what you call an opportunistic feeder, and will eat a variety of different prey.

Feeding Tip 1:   
 I always grab my boa by the tail first, because this lets my boa know that i am not food. Like i said the boa is kind of stupid. It can’t tell the difference between food items. A hand doesn’t looks so much different than a rat when you’re a boa. Be smart and use some gloves, because a boa’s teeth are like fishhooks. I once got bit on the shoe when I was walking by my 10 footer. It took forever to get that shoe back.

Feeding Tip 2: Do not feed large prey items live. That is just a bad idea. When feeding rabbits you should order frozen or kill the rabbit yourself. Larger prey can inflict bites or scratches to your reptile. Your reptile can become infected or badly injured by large prey.

Breeding
When you have a male and female boa you want to breed them. I will first tell you that this is not an easy task for most. The Boa is an interesting snake in the fact that it does not lay eggs. The boa gives live birth to 20-60 young at a time. The female boa will need to be at least 3 years of age. The male must be at least 1 year old. The mating will begin in November, and the process will take 165 days. After the female has ovulated you may remove the male. The female needs to stay at a constant 80 degrees. Remember not to feed your boa for a month prior to birth.

Breeding Tip: When the babies are born remove the female. Do not mess with the young as they will still need some time. They will break free of their embryotic sacks on their own. If you tamper with the sacks the snake will die. The best thing you can do is put the new born babies in a nice clean enclosure that is a stable 80 degrees.

Also make sure to remember that breeding and keeping boas requires a lot of time and energy, the boas grow large requiring bigger meals and enclosures. Remember boas can have up to 60 live young, so do not be unprepared for 60 hungry little snakes. Notice that the litter below has some "morphs". The morphs appear to have the albino gene.

Thanks for reading a little about these wonderful red tail boas. 

Good luck,

Michael Walker

Royal Pythons (Ball Python)

This week I’d like to talk about one of the most common known pet snakes. This animal is great pet for many reasons. The snake has a very docile nature which makes it a favorite for collectors I'm talking about the Royal Python from Africa. Most people call this snake the ball python. .Above you can see a photograph of a normal ball python. Most people have no idea, but actually over 100 ball python morphs exist. New morphs come out every years, so its always interesting to see what’s new. Below are just some of my personal favorites. I feel like there are so many good things about the ball python. I am always amazed to see what new pattern/color mutations will appear next. They are very easy to take care and breed. Another good thing about this python is it stays pretty small. Big females will usually stay under six feet long.

Favorite morphs

•  Bumblebee
• Killer bee
• Albino

You can also go to the link below and search for "ball python morphs" to see a slideshow of the various types of ball python morphs.

• Click link below
• In the search bar
• Type ball python A-Z
• http://www.youtube.com/

Breeding

The average female will lay 4-8 eggs. These eggs must be incubated at a perfect 88 degrees. They will die if you flux too much with the temp. The key to breeding is to make sure your female is healthy and up to weight. You will want to make sure she has proper heating as well. After eggs are laid you will need to get them into an incubator. Set the temp at 88 degrees and wait 55-60 days. If your eggs starts growing mold after a week you need to throw it away. This egg has gone bad for some reason, and will spread mold to the other eggs. If you really want to see if you have a good egg you should use the "candle" method. Turn off all lights and place the egg over a flashlight. You will be able to see red blood vessels if the egg is fertile. Learn how to incubate ball pythons on the web. Here are the results of one breeder’s hard work. It looks like a baby killer bee or Queen Bee. When it comes to ball pythons: the queen bee is the ultimate goal for me. I love this morph, because it’s so much different that the normal.

• Males must weigh at least 400 grams to breed.
• Females must weigh at least 1200 grams to breed.
• You will need a good incubator to hatch eggs.

Breeding Tip: 

The female ball python is very protective of her eggs. Keep in mind that your normally friendly pet will defend her newly laid eggs. Be very careful at this point, because the female will actually hurt the eggs trying to bite you. Be as gentle as possible when removing the eggs. Just be careful when removing the eggs. I personally have only ever been bit once. I got bit trying to take a female ball pythons eggs.

Ball pythons are one of my favorite snakes. Their small size makes them really easy to handle. They are picky eaters in the juvenile stage, but quickly learn to eat frozen/thawed mice. They will rarely strike at a human. Some of the ball python morphs really blow my mind. I really enjoy the ball python morphs. Each different paintjob is like a natural work of art.

Thanks for taking the time to learn a little about ball pythons.

Good luck,
Michael Walker

Leopard Geckos

Today, i would like to talk about the leopard gecko. This is one creature that i have always enjoyed working with, and to this day still keep in my collection. The normal version of the gecko can be found at most pet stores, and you can also find breeders that have quality morphs. This gecko can grow to be about 6 inches in length. The leopard gecko is harmless to humans, but to small insects the leopard gecko is trouble.. I would like to present a couple tips and thoughts about this unique animal.

 

  

Feeding:

 One of the most important things when breeding any reptile is proper nutrition. Breeding project will be more successful if the animal gets the proper nutrients. The leopard gecko is a predator, and in most cases will only hunt prey that moves. This means you must keep live insects to feed the geckos. I always enjoyed watching the leopard gecko feed. They stalk the prey, and just before the animal strikes, a wiggle in its tail can be observed. The motion is graceful and precise. There are several different types of insects you can use to feed. The most common insects used are crickets or mealworms. I recommend that you start you own breeding colony of insects, because driving back and forth buying insects can become expensive. Crickets are hard to keep alive and they produce a fowl odor, so i would recommend mealworms. A mealworm colony is easy to start, so follow these simple steps to save yourself tons of money. 

· Find a plastic shoebox container at Wal-Mart for .99 cents

· Fill with oats or grain found at any grocery store.

· Add mealworms

· Add a few spoonful of water every 3-4 days

· When your mealworms turn into beetles they should start breeding

· The new mealworms are very small but will grow with time.

 Feeding TIP:  Sometimes geckos become stressed and wont chase down their prey. If this happens your gecko will become very thin, and may even die. I have a good trick for this problem.

Find a mealworm feeding dish at a pet store to put in your leopard gecko habitat. Keep this dish full of mealworms at all times. I find that some leopard geckos can be taught that the food is in the dish. You can try placing the gecko by the dish to see if it will notice the mealworms movements. You will have one fat and lazy gecko if you can master this mealworm technique.

Breeding 

When your gecko gets fat you will want to breed it. Female leopards are like chickens in the sense that they will lay eggs without the presence of a male. Since they are going to lay the egg anyways you should find a male and female. Provide a nest box of moist vermiculite. You can find information on the web about how to sex your gecko. The female will lay two eggs at a time, and this is referred to as a clutch. She may produce several clutches a year depending on her size. These eggs should be collected immediately and placed in an incubator. The proper way to do this is easily found on the web. The leopard gecko is TSD or temperature sex dependent, so this means the temperature affects the sex of the egg. The temperature range is from 80-90 degrees. Lower temperatures will produce females and higher temperatures will result in males. Higher temperatures will also increase the rate of growth.

Breeding Tip:  The eggs will dry out only hours after being laid if left in the enclosure. The eggs stay moist in the humidity of the incubator. The trick is to know when your female is going to lay. You might miss a few times, but once you master this technique you will have no problems. Simply look at the females belly and you will notice two white spots on either side. You can see through the skin enough to make out these spots. The closer she is the bigger they will become. The trick is to realize when she is getting close and watch for new eggs. You don’t want the eggs to dry out! I can’t stress that enough. The day she lays her behavior will change, when you see her constantly digging in the nest box you know she is about to lay

• This is a patternless gecko

• Here is my HYPBINO, its a combination of albino and hypo

Thanks for taking the time to learn about leopard geckos. Any comments or questions are welcome.

Thanks,

Michael Walker

General Reptiles

My name is Michael Walker, and i have been a breeder of various reptiles for over 15 years. I have had a fascination with nature and all animals in general for the most part of my life. Reptiles in particular never fail to capture my attention. The genetic makeup of reptiles in general is amazing. I believe animals like turtles and crocodiles may hold secrets to reverse aging. There is much that could be said about that particular topic, but for now my cause is to educate hobbyists on methods and tricks for successfully breeding various reptiles. Growing up, i never had anyone to turn to with help me with problematic reptile issues. I feel that there is  so much that could be said about reptiles, and its impossible to cover all the information in a simple blog. It could take a person a whole lifetime to fully cover each reptile.

 One must be fairly intelligent to understand basic genes and mathematical probabilities when breeding reptiles. I think breeding reptiles is a interesting hobby. I have learned a lot about science, math, and genetics as a result of my interest for reptiles. Many people remain oblivious to the new discoveries made each year. The term morph refers to the word mutation, and there are countless mutations being selectively breed at any given time. A common morph that many have heard of is albino. It is also important to know what the word "het" means, so to eliminate confusion "het" simply means, that the animal does not show the gene visibly, but does carry the gene in the DNA. An example, one could either have an albino snake or a het albino.. There are some animals out there that have gone polymorphic, and contain five or more genes.

 I will most likely add-to and edit this blog over the next couple of weeks. Please remember that i have a hard time spelling and producing these blogs. I dont spell very well, and my sentece structure needs work. Keep that in mind as you read through my blogs. I will gladly talk further on topics or answer questions. If you would like me to cover a reptile tell me and i will spend an entire blog talking about each animal.

Check the link below if you are interested in learning more about reptile morphs and prices. This is one of my favorite sites to look for reptile news. You can use this site in a lot of different ways. At this site you can find links to other sites with helpful information. Just click the blue link.

· Click the link below

· Go to the classifieds section

· Select the type of reptile you want

· King Snake

Thank you for spending the time to read this blog.

Good luck breeders,

Michael Walker